HappySmartSmartLove
Care for the people you love, without having to keep watch.
SmartLove · For families looking after an older parent

Let the home help look after your parents on the days you can't be there.

Your parents live at home as usual — nothing to wear, no button to press, and no camera in the bedroom or bathroom. When the system picks up something worth checking, you get a LINE, app or SMS message saying what happened and in which room.

An early-notification aid, not a medical device · radar layer in development

Prepared by
HappySmart · a TecTony studio
For
Family homes & elder-care facilities
Scope
Fall, long-stillness & bed-exit alerts, plus safe-home automation
Status
mmWave radar layer in development
Platform
Local Home Assistant, privacy-first
Important
An early-notification aid, not a medical device
What we promise

What you can check before you decide

  • No camera in the bedroom or bathroom

    The most private rooms are covered by sensors that capture no image. Cameras go only in shared spaces such as the living room and entry, and recordings are stored on the hub at home.

  • Nothing to wear, nothing to press

    No pendant to forget and no button to remember. The system works through sensors installed in the home.

  • Every alert tested with the family before handover

    The install team tunes the thresholds to the home and tests each alert with the family before handing the system over.

  • The limits, stated plainly

    SmartLove is an early-notification aid, not a medical device. The radar layer is still in development, and each sensor's limits are written on this page.

The recommendation

A home covered in layers, not just a set of gadgets

Our advice is layered coverage: give each room the sensor suited to it, let them cover each other's blind spots, and tie every one to a single hub that alerts the family. Here's how a typical home comes together.

A home under quiet watch
Sensing mapped to each room
ห้องนอนBedroomบนเตียง / ออกจากเตียง · ไฟนำทางin / out of bed · guiding lightห้องน้ำBathroomล้ม · อยู่นิ่งนาน · ไม่มีกล้องfall · long stillness · no cameraทางเดินHallwayไฟนำทางguiding lightห้องนั่งเล่นLiving roomกิจกรรม · ยืนยันเหตุactivity · verificationทางเข้า & สวนEntry & gardenตรวจจับบุคคลperson detection
mmWave radar (in development) — falls, long stillness & bed exit, with no image
Weight / motion — soft guiding light at night
AI camera — activity & visual verification

Bedroom

Sleep-mode mmWave radar (in development) + weight floor sensor

The sleep-mode radar above the bed tells the family whether a parent is in bed or has left it, all night, with no image. The bedside weight sensor eases a soft light on when feet touch the floor — a guiding light without waking anyone, and pets lighter than the threshold won't trigger it. For fall alerts in the bedroom too, add a second radar in fall mode on the ceiling.

Bathroom

Fall-mode mmWave radar on the ceiling (in development)

The wet, slippery and most private room in the house, covered with total dignity — an alert for a fall, or for someone staying still in the bathroom longer than the time the family sets, with no camera.

Hallways & stairs

Infrared motion → guiding light

Motion sensors light the path automatically at night and flag unusual inactivity by day. A camera at the stairs adds verification where a slip is most likely.

Living, kitchen & entry

AI camera + infrared motion

Cameras let family see and confirm, plus security at the door and garden. Motion sensing tracks daily rhythm and prompts a check-in call if the usual morning routine doesn't happen.

What HappySmart provides

Open prices — hardware, install and care

SmartLove is delivered turnkey: we assess the home, install and tune every sensor, set up the alerts your family will actually use, and support it afterwards. Core hardware is priced below; the radar layer (in development) and the weight-sensor layer are quoted after a free home assessment.

Hardware prices
ItemPrice
HappySmart ServerLocal hub · automations run offline · HomeKit + Matter + Mi Home + Tuya฿5,900
Vision Camera4K AI · HomeKit Secure Video · best seller฿2,490
Climate ModuleAC + dehumidifier control · IR + Wi-Fi฿1,990
Mi Home BridgeXiaomi / Aqara · Zigbee + Wi-Fi฿1,290
Circadian Light2200–6500K · gentle night-lighting · Matter฿890per bulb
Smart Plug16A · power monitoring · Matter฿590
Earthquake Sensor3-axis MEMS · alerts via the home system · auto power cut & door unlock฿3,290
mmWave radar & weight floor sensorPer-room fall / long-stillness / bed-exit layers · radar in developmentOn assessment
SmartLove, for one parent's homeA typical starting configuration — tailored to the actual rooms after a site visit.
What's in itPrice
HappySmart Server hub running Home Assistant locally฿5,900
Sleep-mode mmWave radar above the bed (in bed / out of bed) · in developmentOn assessment
Fall-mode mmWave radar on the bathroom ceiling (fall + long stillness + presence) · in developmentOn assessment
Bedside weight sensor → automatic guiding lightOn assessment
Motion sensors for hallways & inactivity checksIn your quote
Vision Camera for the living area & entry฿2,490
Family alerts by LINE, app & SMS — in Thai or EnglishIn your quote

Financing available: 0% instalments over 10 months on starter kits. Larger homes and care facilities scale the same design across more rooms and residents.

We install & tune

Our team mounts every sensor, calibrates thresholds to the household, and tests each alert with the family before handover.

We set the alerts

Notifications your family will actually act on — the right people, the right channel, with context like "movement detected in the bathroom," in the language they read.

We stay on

Ongoing support and remote system status checks keep the system current, with updates pushed to the hub and a person to call if anything needs attention.

Terms

The terms, in plain words

Free home assessment, no obligation
We look at the real rooms in your parents' home and quote a system tailored to it. You decide afterwards.
Hardware prices are public
Core hardware prices are in the table on this page. The radar layer (in development) and the weight-sensor layer are quoted after the home assessment.
0% over 10 months
On starter kits.
Designed around the real rooms
The package below is a typical starting point; the real list is tailored after the site visit. Larger homes and care facilities scale the same design.
The toolkit

Four ways to watch over a home

No single sensor is right for every room. Each of these has a job it does better than the others — and a limit worth knowing before it goes on the wall. We choose openly, so each home gets the mix that fits its real needs.

01The core

mmWave radar

A 60 GHz radar (DFRobot C1001), in development: in fall mode (ceiling) it flags a fall or someone staying still longer than a set time; in sleep mode (above the bed head) it flags someone leaving the bed — with no camera and nothing to wear.

BedroomBathroomFall detectionBed exit

How it works

A DFRobot C1001 radar module sends low-power radio waves at 60 GHz and reads the reflections, capturing no image at all. Each unit is set to one mode at a time and mounted to suit it: in fall mode (on the ceiling, facing straight down) it reports a fall, someone staying still longer than a set time, and whether anyone is in the room; in sleep mode (above the head of the bed) it reports whether the person is in bed or has left it.

Where it shines

This is the technology that covers the most private rooms — the bedroom and bathroom — with full dignity, because there is no image to record. In the bathroom it raises an alert when someone appears to have fallen, or has stayed still for longer than the time the family sets. At the bedside it tells the family when a parent leaves the bed in the night and has not returned within the set time. Nothing to wear, nothing to press.

What to keep in mind

One unit runs one mode at a time: a sleep-mode unit above the bed does not detect falls, and a fall-mode unit on the ceiling does not report in-bed status, so a room that needs both uses two units. How long someone may stay still before an alert is set with the family at install. The manufacturer's support forum notes that a fall ending with the person sitting on the floor, rather than lying flat, may not be detected. The manufacturer advises avoiding easily swaying objects in the room, such as exhaust fans, metal blinds and blackout-coated curtains. The module can estimate breathing and heart rate, but SmartLove does not read, store or show those values — SmartLove is an early-notification aid, not a medical device.

Fall mode (ceiling): fall · long stillness · presence · faces straight down · 100°×100° beamSleep mode (above the bed head): in / out of bed · about 1 m above it, tilted down 30–45°Radio: 60 GHz band, 6 dBm (manufacturer spec)Camera: noneStatus: in development · quoted after a home assessment
02The witness

AI camera

A 4K camera paired with AI on the home hub that detects people and lets family see what actually happened.

Living roomEntry & gardenActivityVerification

How it works

The HappySmart Vision Camera streams to a local AI recorder (Frigate) on the home hub. It detects people, pets and vehicles frame by frame, records only when something matters, and can flag "a person is on the floor" with pose analysis. Recordings and processing stay in the house.

Where it shines

A camera lets family see for themselves. When another sensor raises an alarm, family can open the app and look at the shared-area camera to see whether it's a real emergency or a false alarm, then decide who to call. It's also especially well suited to entryways, gardens and stairs.

What to keep in mind

A camera belongs in shared spaces — never the bedroom or bathroom. Plain person-detection is not fall detection: catching a fall on camera needs a pose-AI layer we configure deliberately. It needs light (or night-IR), a capable hub, and local storage.

Resolution: 4K, HomeKit Secure VideoAI: local (Frigate on hub)Records: on-eventBest rooms: shared areas only
03The tripwire

Infrared motion

A low-cost PIR sensor that reacts to movement — unobtrusive, private, and ideal for automations.

HallwaysInactivity alertAuto-lighting

How it works

A passive infrared sensor notices the warmth of a moving body and reports motion or no-motion — nothing more. It's battery-powered, records no image, and is the cheapest way to add awareness. In SmartLove it triggers helpful automations, such as hallway lighting.

Where it shines

As a supporting layer it's excellent value: hallway coverage, inactivity monitoring ("no motion in the kitchen all morning"), and simple automations. Fully private, easy to place, and a natural companion to the radar and camera layers.

What to keep in mind

Its key limit for senior care: it can't see a still person. A senior who has fallen and lies motionless stops triggering it, which can read as a false "all clear" — so PIR is never our primary fall detector. Pets, sunlight and drafts can also set it off.

Output: motion / no-motion onlyRecords: nothingRole: automation, not fallsLink: Zigbee / Matter
04The threshold

Weight floor sensor

Pressure sensing that reacts to real body weight — so a light comes on when a person steps out of bed, but not for a pet lighter than the threshold.

BedsideBed exitNight-light

How it works

Load cells under the floor or bed-frame (or a slim pressure mat) measure actual weight and trigger at a threshold you set — say, above 15 kg. When a parent's feet touch the floor at 2 a.m., SmartLove eases on a low guiding light to the bathroom — without flooding the room or waking a partner.

Where it shines

It's the only layer that judges by weight, solving the exact problem motion sensors have: a dropped pillow or a wandering cat won't trigger it — a person will. That makes it the best fit for gentle night-lighting, and it can also sense bed occupancy.

What to keep in mind

There's no plug-and-play kit — we build it, integrating load cells and an amplifier into the home system, or wiring a pressure mat into Home Assistant. That means a short install and calibration step, and it covers a defined zone rather than a whole room.

Triggers on: weight threshold (configurable)Zone: bedside / doorway / under-mattressBuild: custom integration by HappySmartBest use: guided light & bed-occupancy
At a glance

How the four compare

The honest trade-offs, side by side. In practice most homes do best with several of these together — each covering the others' blind spots.

TechnologyFully privateDetects a fallBed exitWorks in the darkHandles 2+ peopleRecords videoBest for
mmWave radar (in development)Yesno imageYesfall modeYessleep modeYesPartlychecked at assessmentNoBedroom & bathroom
AI cameraNoshared rooms onlyPartlywith pose AINonot in bedroomsPartlywith IRYesYesLiving, entry, garden
Infrared motionYesNomisses a still personNomotion onlyYesNocan't tell apartNoHallways, inactivity
Weight floor sensorYesNoweight, not fallsYesbedside matYesPartlyby weightNoBedside night-lighting
How it runs

One brain for the home — and it stays in the home

Every sensor reports to a single local hub that turns raw signals into decisions and sends alerts to the family by app, LINE or SMS. Where that brain lives is a real choice, so here are the options and what we recommend.

Recommended

Local hub, in the house

A HappySmart Server (a Raspberry Pi 5-class Home Assistant hub) runs the system on-site, 24/7, processing and storing data in the house. If the internet drops, in-house automations keep running (alerts to family phones by LINE, app or SMS need a connection), and decisions don't wait on a round-trip to the cloud. This is the SmartLove default — the private, resilient choice for a family home.

Best for almost every home

HappySmart Server as the hub

Our hub, which keeps in-house automations running offline, unifies devices from many brands across HomeKit, Matter, Mi Home and Tuya, so the radar, cameras and sensors all speak one language — and mix cleanly with any smart-home gear the family already owns.

Unifies mixed hardware

Each device's own app

Every sensor can run on its manufacturer's own app instead. It works, but alerts end up spread across several apps with no shared automations, and most rely on the cloud — better suited to a single device than to whole-home care.

Not advised as the main system

Cloud / remote hub

For a care operator overseeing many homes at once, the hub can run centrally in the cloud. It trades away some privacy and offline resilience, so we use it only when central, multi-home management is the actual goal.

Only for multi-home operators
Why now

Home is the place an older parent knows best — let it help keep watch.

The danger in a fall is not only the fall itself — it is a fall that no one notices. SmartLove helps close that gap: it alerts the family when it picks up something worth checking, and eases on a soft guiding light at night — designed around Thai homes, Thai families, and the wish to care for elders in the home they know.

22.40%
of Thai nationals are already 60 or older — about 14.49 million people (data as of 31 Aug 2026).
Source: Department of Older Persons dashboard (civil registration data, Department of Provincial Administration)
684,000
people worldwide are estimated to die from falls each year, and adults over 60 suffer the most fatal falls.
Source: World Health Organization, fact sheet (2021)
No wearable
No pendant to wear and no help button to press — SmartLove works quietly in the background.
Questions

The questions families ask

Can SmartLove detect a fall without a camera in the bedroom?
That is the job of the 60 GHz mmWave radar layer, which is in development. In fall mode (ceiling), the radar alerts on a fall or on someone staying still longer than a set time, with no image recorded. In sleep mode (above the bed head), it reports whether the person is in bed or has left it, but does not detect falls, so a bedroom that needs both uses two units.
Is SmartLove a medical device? Does it measure heart rate or breathing?
No. SmartLove is an early-notification aid, not a medical device, and it cannot replace one. The radar module can estimate breathing and heart rate, but SmartLove does not read, store or show those values, and it does not diagnose or treat anything. To monitor heart rate or breathing, please use a medical device on a doctor's advice.
Does the senior need to wear anything?
No. SmartLove works through sensors installed in the home — no pendant to wear and no button to press.
Is data sent to the cloud?
By default all processing runs on a local Home Assistant hub in the house, and sensor data and camera recordings are stored there. What leaves the home is the alert message to the family, and camera images when the family opens the app to look. If the internet drops, in-house automations keep running, but alerts to family phones by LINE, app or SMS need a connection to get through.
How does the family get alerted?
By LINE, app and SMS, with context about what happened, in Thai or English — whichever the family reads.
How much does it cost to start?
Core hardware starts at the ฿5,900 HappySmart Server; the radar layer (in development) and the weight-sensor layer are quoted after a free home assessment, and 0% instalments over 10 months are available on starter kits.
Next step

Talk to us on LINE — the home assessment is free.

Tell us how many rooms your parents' home has, who lives there, and what you worry about most. We'll design the system, show exactly what it covers, and quote it with no obligation.

HappySmart · SmartLove — an AI Living System studio under TecTony, Bangkok. SmartLove is our elderly-care solution built on a local, privacy-first Home Assistant platform. Radar modes and mounting follow the manufacturer's documentation for the DFRobot C1001 module (read 25 Sep 2026); camera behaviour reflects the real-world experience of the Home Assistant and Frigate communities as of mid-2026. The radar layer is in development. Sensor performance depends on correct placement and calibration. SmartLove is an early-notification aid, not a medical device: it offers no vital-sign measurement, makes no diagnosis, and does not replace care from medical professionals or emergency medical services.